Before purchasing an air compressor, it is essential to choose the best place to place it. In this way, you will guarantee its performance. The location not only affects how the compressor will work, but it will also improve the efficiency of your company and the productivity of your collaborators.
In this post, we will show you five factors that you should consider when choosing where to place your air compressor.
Your air compressor should always be accessible for routine maintenance. The rule of thumb is to place it somewhere where you can have at least one meter of space around the unit. Keep in mind that some of the system components are large and may require more space so that they can be easily removed or repaired.
In some situations, you will have to place the compressor in a less-than-ideal location. This will require you to take extra steps to keep your equipment safe and accessible. For this reason, it is good to plan the area before purchasing an air compressor.
2. Air Circulation And Room Temperature
Air circulation and compressor room temperature are crucial in keeping your system running smoothly, and same goes with Fluid-Aire Dynamics. When installing after purchasing an air compressor, make sure the room temperature is low.
The compressor will also need adequate air circulation and proper ventilation to prevent the system from shutting down. If your unit is in an enclosed space, it will overheat, and this will cause technical problems, which will damage your compressor.
3. Location Of The Power Distribution Center
The distance between the power and your system is of great importance. The further away the power is, the more expensive your compressor wiring will cost. For every 30 meters between your equipment and the power distribution source, the wiring should be increased.
This will cause the energy cost of your equipment to increase. Make sure to check the location of the power distribution center before placing your unit.
4. The Area Around Your Air Compressor
If your facilities need to be clean all the time, you should consider using a container for your air compressor. At some point, your unit will experience an oil leak. The container will act as a gutter and will capture any oil residue, keeping it from spilling on the floor.
5. Noise And Vibration Levels
Are your collaborators close to your compressor? If so, you will want to reassess the location of your unit. Some air compressors are very loud, which can make your workers’ productivity low and uncomfortable. If your unit is excessively noisy, you can take the following measures:
- Get a screw compressor
- Put your compressor somewhere else
- Build a compressor room with sound-absorbing walls